Feature Button Disable - Comdial DX-80 Installation & Maintenance Manual

Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing «.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press «.
• Use ¢£¤¥ to highlight "CO Line Application." Then press «.
•
Use ¢£¤¥ to highlight "Fax Detection." Then press «.
•
Use ¢£¤¥ to highlight the database item "FAX Destination" for the CO Line port that will receive
Facsimile transmissions.
•
Press «
.
• Input the Analog port directory number that is connected to the FAX machine, then press «.
•
If other CO Line ports will also receive FAX transmissions, input that data in the same manner.
•
When all changes are made press the ° (escape) key to exit this database programming screen. You will
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
•
Press ° (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

Feature Button Disable

This extension option will disable use of the feature button at that extension. This option can be helpful when the
telephone is located in an environment where it can easily be tampered with, or where user changes are not
desirable.
Related Features
All features accessed using the
Related Programming
Extension - Feature Button Disable
Default Settings
Extension – FTR BTN Disable is set to "N." (Range is: Y/N.)
Programming Abstract
Program the extension(s) for Feature Button Disable if they are to be restricted from using any system
feature codes.
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
!
button.
3-126
M 03/01
ANUAL
!