•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press
(escape) again to return to the Database Programming menu.
¢£¤¥
•
Use
to highlight "System Resource." Then press
¢£¤¥
•
Use
to highlight "Attendant." Then press
¢£¤¥
•
Use
to highlight the Attendant or Alternate Attendant for the Tenant Group you wish to
program. Then press
•
Input the directory number of the extension.
«
•
Press
.
•
Continue making other programming changes as required.
•
When you have completed all changes, press the
screen. You will see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press
(escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Call Back – Cancel All
This feature allows you to cancel all Call Backs on an extension or CO Line with one command.
Related Features
Call Back – CO Line
Related Programming
Call Handling – Tenant Calling
Operation
Prior to receiving Call Back Alert Ringing, press
P7290 IMM
DX-80 I
NSTALLATION AND
«
.
!,,
3-39
M
M
AINTENANCE
ANUAL
«
.
«
.
°
(escape) key to exit this database-programming
Call Back – Extension
.
!##