•
Press "Y" (yes) to continue with the save operation.
•
Press ° (escape) again to return to the Database Programming menu.
Program External Pager to a Tenant Group and Paging Groups:
•
Use ¢£¤¥ to highlight "System Resource" and then press «.
•
Use ¢£¤¥ to highlight "External Pager" and then press «.
•
Use ¢£¤¥ to highlight the Tenant Group or Paging Group that you wish to program.
•
Then press « until the appropriate value displays for these parameters.
•
When all changes are made press the ° (escape) key to exit this database-programming screen. You will
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
•
Press ° (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Pause / Pause Insertion
Pause Insertion is used to generate an intentional delay in dialing on outgoing CO line calls. A pause or a
combination of pauses may be stored in the Speed Dial bins to allow timed access to special services, while allowing
you to monitor the progress of the call.
A pause will appear as "P" on a Digital Speakerphone display.
The system also supports Automatic Pause Insertion. This function monitors digits dialed on "PBX" Type CO Lines for
PBX Codes entered. When a PBX Code is recognized, the system automatically inserts a pause between that digit
and the remaining digits for Last Number Redial system features.
Related Features
Automatic Busy Redial
Last Number Redial
Memo Pad
Related Programming
CO Line - CO Line Type
Call Handling - Pause Time, PBX Auto Pause
System Resource - Speed Number Programming
Operation
When storing numbers in speed dial use the feature code
Conditions
A pause occupies one digit position when stored in speed dial.
P7290 IMM
DX-80 I
M
NSTALLATION AND
AINTENANCE
Saved Number Redial
Speed Dial - Extension, System
PBX Compatibility
3-181
M
03/01
ANUAL
!70
to insert a pause.