Repeater List Programming - Icom i9100 Instruction Manual

7
DV MODE PROGRAMMING

■ Repeater list programming

New repeater list
1.
q Push [DV•DR] to select the DV mode.
w Push [MENU] one or more times to display the "M3"
screen (Menu 3).
• In the DR mode, push [MENU] once or twice to select
the "D1" screen.
M3
CS C D
When the "M3" screen is selected.
e Push [DSET](F-5) to display the "DSET" screen.
DSET
r Push [RP-L](F-4) to display the "RP-L" screen (Re-
peater list).
RP–L R e p e a t e r
t Push [ADD](F-3) to display the "NAME" item (Re-
peater name).
N A M E :
RP–L
Ù
To cancel the programmed data:
After programming, push [MENU] to display
"Cancel OK?." Push [YES](F-4) to cancel pro-
gramming and return to the "RP-L" screen (Re-
peater list), or push [NO](F-5) to keep program-
ming and return to the previous screen which
was selected before pushing [MENU].
Repeater name programming
2.
y Push [EDT](F-4) to enter the repeater name pro-
gramming mode.
• A cursor appears and blinks.
RP–L N A M E :
A B C
u Push [ABC](F-1) one or more times to select the
desired character type.
Character type
ABC
abc
etc
89
programming
R > C S U R DSET
T X M R P — L S E T
L i s t
C L R A D D E D T
Ú
E D T
Blinks
Ω ≈
D E L S P C
Selectable characters
A to Z
a to z
! # $ % & \ ? " ' ` ^ + – ✱ ⁄ . , : ; =
< > ( ) [ ] { } ¦ _ ¯ @
i Rotate [MAIN DIAL] to select the first character or
symbol to input.
When inputting numbers or a decimal point, push
the appropriate keypad key.
• Push [DEL](F-4) to delete the selected character, sym-
bol or number.
• Push [SPC](F-5) to input a space.
• When all 9 characters have been programmed, an error
beep sounds. If you want to reprogram, push [Ω](F-2) or
[≈](F-3) to select a character, then push [DEL](F-4) to
delete it.
o Push [Ω](F-2) to move the cursor backward, or push
[≈](F-3) to move the cursor forward.
!0 Repeat steps u through i to program a name of
up to 9 characters.
!1 Push [MENU] to save the name.
Repeater call sign programming
3.
!2 Push [Z](F-2) to display the "CS" item (Repeater
Call Sign).
!3 Push [EDT](F-4) to enter the repeater call sign pro-
gramming mode.
• A cursor appears and blinks.
Blinks
RP–L C S :
Ω
!4 Rotate [MAIN DIAL] to select the first character or
symbol ('/' only) to input.
When inputting numbers, push the appropriate key-
pad key.
• Push [DEL](F-4) to delete the selected character, sym-
bol or number.
• Push [SPC](F-5) to input a space.
• When all 8 characters have been programmed, an error
beep sounds. If you want to reprogram, push [Ω](F-2) or
[≈](F-3) to select a character, then push [DEL](F-4) to
delete it.
!5 Push [Ω](F-2) to move the cursor backward, or push
[≈](F-3) to move the cursor forward.
!6 Repeat steps !4 through !5 to program a repeater
call sign of up to 8 characters.
!7 Push [MENU] to save the call sign.
C S : JP3YHH B
RP–L
Ù Ú
Be sure to add a letter after a repeater call sign,
as the repeater node (port), according to the re-
peater frequency, as shown below. Note that
Japanese repeater node letters are different.
• 1200 MHz : A (B in Japan)
• 430 MHz : B (A in Japan)
• 144 MHz : C (no D-STAR repeaters in Japan)
Cross band operation between different nodes in
the same repeater area can be made.
≈
D E L S P C
E D T