Satellite Memory; D Satellite Memory Selection; D Satellite Memory Programming - Icom i9100 Instruction Manual

12
SATELLITE OPERATION

■ Satellite memory

The IC-9100 has 20 satellite memory channels (CH 00
to 19) to memorize both uplink and downlink frequen-
cies, operating modes and other data.

D Satellite memory selection

q Push [SATELLITE] to enter the satellite mode.
w Push [VFO/MEMO] to select the satellite memory
mode.
• "MEMO" and the memory channel number are displayed
beside the uplink frequency (SUB band) display.
e Rotate [M-CH] to select a satellite mode Memory
channel.

D Satellite memory programming

q Push [SATELLITE] to enter the satellite mode.
w Push [VFO/MEMO] to select the satellite memory
mode.
e Rotate [M-CH] to select the desired Memory chan-
nel.
r Select the desired downlink frequency in the MAIN
band, and uplink frequency in the SUB band, as
well as the operating mode.
t Hold down [MW] for 1 second to program the con-
tents into the Memory channel.
• Three beeps sound when the memory programming has
completed.
NOTE: Tracking selection, normal or reverse, is not
programmed in the satellite memory channels.
155
Downlink (Receive) frequency
M1
A G C D U P C O M P T B W
Satellite memory channel
Uplink (Transmit) frequency
M1
A G C D U P C O M P T B W
Select the desired satellite
memory channel
S C P
S C P