D Confirming The Setting; D Settings For "Ur" And "R2," Depending On The Communication Form - Icom i9100 Instruction Manual

8
DV MODE OPERATION
■ Calling a specific station (Continued)

D Confirming the setting

q In the DR mode, push [MENU] one or more times to
display the "D1" screen.
w Push [CS](F-1) to display the "CS" screen (Call
Sign).
e Push [Z](F-1) one or more times to sequentially
display the "UR," "R1," "R2" or "MY" to confirm the
current call sign setting.
NOTE: In the DR mode, you can change only the
"MY" call sign in the "CS" screen (Call Sign).

D Settings for "UR" and "R2," depending on the communication form

<Communication form: Local area call>
• UR setting: CQCQCQ
• R2 setting : N/A
<Communication form: Zone call>
• UR setting: Destination repeater to send CQ in
the same zone
• R2 setting : N/A
<Communication form: Gateway call>
• UR setting: Destination repeater to send CQ
• R2 setting : N/A
NOTE: R1 setting is set to your access repeater's call sign.
105
Destination: CQ
CQ
CQ
CQ
[MENU] [CS]/[Z]
R : N A R A 4 3
D1 1
CS C D R > C S
CS U
JG3YMK
R
Ú
M
J A 3 Y U A
Y
Destination: An individual station
Repeater q NARA43 (JP3YHL)
MY call sign
<Communication form: Local area call>
JA3YUA
Repeater r IKOMA43 (JP3YHJ)
• UR setting: An individual station
• R2 setting : NOT USE✱
<Communication form: Zone call>
• UR setting: An individual station
• R2 setting : Destination repeater in the same
zone
<Communication form: Gateway call>
• UR setting: An individual station
• R2 setting : GW
GRP3
U R DSET
R
JP3YHL
1
R
JP3YHJ
2
Station call sign
JG3YMK