Scan Set Mode; Scan Speed - Icom i9100 Instruction Manual

11
SCANS

■ Scan set mode

The scan speed, Scan Resume function and [MAIN
DIAL] scan function can be set in the Scan Set mode.
q Push [MENU] one or more times to display the "M2"
screen (Menu 2).
w Push [SCAN](F-1) to display the "SCAN" screen.
e Push [SET](F-5) to enter the Scan Set mode.
r Push [Y](F-1) or [Z](F-2) to select the desired
item.
t Rotate [MAIN DIAL] to select the desired option.
• Hold down [F-3] for 1 second to reset to the default
value.
y Push [MENU] to save, and return to the "SCAN"
screen.
u Push [MENU] again to return to the "M2" screen
(Menu 2).

SCAN Speed

1.
Select the desired scan speed between high and low.
• HIGH : The scan is faster.
• LOW : The scan is slower.
2. SCAN Resume
Set the Scan Resume function ON or OFF.
• ON : When a signal is detected, the scan pauses for
10 seconds, then resumes. When a signal dis-
appears, the scan resumes 2 seconds later.
• OFF : When a signal is detected, the scan is can-
celled.
MAIN DIAL (SCAN)
3.
Select how the [MAIN DIAL] functions, during a scan.
• OFF : Rotating [MAIN DIAL] cancels the scan.
• Up/Down : Rotating [MAIN DIAL] changes the scan-
ning direction.
147
(Default: HIGH)
(Default: ON)
(Default: Up/Down)
[SCAN]/[∫] [√] [SET]
[MENU] [F-3]
M2
SCAN M E M S W R TCON
Push
∂ F
PROG:P1
SCAN
∂ F
P R O F I N SPAN
SCAN Speed
S E T
Ù
Ú
1
Push
SCAN Resume
S E T
Ù
Ú
2
Push
MAIN DIAL (SCAN)
S E T
Ù
Ú
3
[MAIN DIAL]
V S C
±
: 1 0 k
S E T
Push
HIGH
O N
U p / D o w n