Clearing A Repeater List - Icom i9100 Instruction Manual

After programming
3.
To add the programmed data as a new list:
!0 Push [Z](F-2) to select the "ADD Write" item, then
hold down [WR](F-5) for 1 second.
• "ADD Write OK?" appears.
ADD W r i t e
RP–L
Ù Ú
!1 Hold down [YES](F-4) for 1 second to add a new
list, and return to the "RP-L" screen.
ADD W r i t e O K ?
RP–L
Ù Ú
To overwrite the programmed data to the selected
list:
!0 Push [Z](F-2) to select "OVER Write" item, then
hold down [WR](F-5) for 1 second.
• "OVER Write OK?" appears.
OVER
RP–L
Ù Ú
!1 Hold down [YES](F-4) for 1 second to overwrite to
the selected list, and return to the "RP-L" screen.
OVER W r i t e O K ?
RP–L
Ù Ú
W R
Y E S N O
W r i t e
W R
Y E S N O
DV MODE PROGRAMMING

■ Clearing a repeater list

Contents of programmed list can be cleared (erased).
q Push [DV•DR] to select the DV mode.
w Push [MENU] one or more times to display the "M3"
screen (Menu 3).
M3
CS C D R > C S
e Push [DSET](F-5) to display the "DSET" screen.
DSET
T X M
r Push [RP-L](F-4) to display the "RP-L" screen (Re-
peater list).
R e p e a t e r
RP–L
C L R
t Push [CLR](F-3) to display the repeater list.
y Rotate [MAIN DIAL] to select the desired repeater
list to be erased.
• Hold down [GRP](F-5) for 1 second to enter the
repeater group selection mode. ("≈" moves next
to the repeater group name, and then blinks.)
Rotate [MAIN DIAL] to select the desired group (0
to 9), then push [GRP](F-5).
Or, you can select the repeater group using the
keypad key.
u Hold down [CLR](F-1) for 1 second.
• "Clear OK?" appears.
i Hold down [YES](F-4) to clear the selected list, and
return to the "RP-L" screen.
7
U R DSET
R P — L S E T
L i s t
A D D E D T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
92