I Scan Set Mode; I Memo Pad Set Mode; I Compressor Set Mode - Icom IC-910H Instruction Manual

10
SET MODE

I Scan set mode

Programmed scanning range
Select the programmed scan range from 1A-1b, 2A-
2b and 3A-3b.
• 1A-1b : Scans within the range programmed in the
memory channel 1A and 1b.
• 2A-2b : Scans within the range programmed in the
memory channel 2A and 2b.
• 3A-3b : Scans within the range programmed in the
memory channel 3A and 3b.
Scan resume condition
Select the scan resume condition from ON and OFF.
• on : Scan resumes.
• oFF : Scan cancels when a signal is received.
Scanning speed
Select the scanning speed from high and low.
Scan type
Memory scan (Mode select)
Prog. scan (TS<1 kHz)
Prog. scan (TS>1 kHz)
Tone scan

I Memo pad set mode

Number of memo pad channels
Select the number of memo pad channels available
from 5 and 10.
• 5 : 5 memo pad channels can be used.
• 10 : 10 memo pad channels can be used.

I Compressor set mode

Compression level
Adjust the compression level for the speech com-
pressor to the desired level within 0–100% range.
64
HI Lo
20 CH/sec. 10 CH/sec.
50 steps/sec. 25 steps/sec.
20 steps/sec. 10 steps/sec.
20 steps/sec. 10 steps/sec.
From The N3UJJ.COM Document Library From The N3UJJ.COM Document Library
SCAN
SCAN
SCAN
COMP MP
SCAN
SCAN
SCAN