Scan Set Mode - Icom IC-7100 Instruction Manual

Previous view
12
SCAN OPERATION

Scan Set mode

The Scan speed, Scan Resume function, Pause Timer,
Resume Timer and the Dial function can be set in the
Scan Set mode.
q
Push (C) one or more times to select the "M-
MENU
1" (Menu 1) screen.
w D) to display the "SCAN" screen.
Touch [SCAN](
e D) to display the "SCAN SET" screen.
Touch [SET](
r
Touch the desired item.
• To go back the previous tree level, touch [2](D), or
MENU
(C).
t
Touch a desired option shown on the display.
• When you touch an option, it is automatically saved and
goes back the previous tree level.
• Push (C), and then touch "Default" to reset to the
QUICK
default setting, if desired.
y
Push to return to the "SCAN" screen.
MENU (C)
L eft D isplay
C enter
12-4
The L, R, C or D in the
R ight
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
Touch [SCAN]
Touch
[SET]
Touch a desired
item.
( Example:
SCAN Resume)
Touch a desired
option.
(Example: OFF)