Firmware Upgrade Page - Extron electronics MPX 423 A User Manual

Firmware Upgrade Page

The Firmware Upgrade page (shown in figure 12) provides a way to replace the firmware
without taking the switcher out of service.
or
Figure 12.
NOTE: The Firmware Upgrade page is only for replacing the firmware that controls all
switcher operation. To insert your own HTML pages, see
page 35 later in this section.
Updating the firmware
Insure that your PC is connected to the MPX 423 A switcher via the Ethernet port on the
switcher. Update the firmware as follows:
1. On the Extron website (www.extron.com) hover over the Download tab and select the
Firmware link from the drop-down list. The Download Center Firmware page opens.
2. Navigate to the MPX 423 A.
3.
Ensure the available firmware version is a later version than the current one on the device.
4. Click the Download link in the far right column.
NOTES:
•
•
5. Submit required information and follow on-screen instructions to start the download.
Note where the file is saved.
6. From the save location, open the executable (.exe) file.
Firmware Upgrade Page — Version 1.00 (Top), Version 1.02 (Bottom)
You must have an Extron Insider account and log in to that account to
download either firmware or software.
The firmware release notes file provides details about the changes between
different firmware versions. The file can be downloaded from the same page as
the firmware..
File Management Page
MPX 423 A • Ethernet Control
on
33