Table of Contents
Advertisement
8.4 Configure SNMP Setup
SNMP is an application-layer protocol that provides a message format for communication
between SNMP manager and agent. By enabling SNMP function, the administrator can
obtain the system information remotely. Please click on System -> SNMP Setup and
follow the below setting.
8.4.1 SNMP v2c Enable: Check to enable SNMP v2c.
8.4.1.1
ro community : Set a community string to authorize read-only access.
8.4.1.2
rw community : Set a community string to authorize read/write access.
8.4.2 SNMP v3 Enable: Check to enable SNMP v3. SNMPv3 supports the highest level
SNMP security.
500mW eXtreme Power 11Na Outdoor Bridge
257
User's Manual
Advertisement
Table of Contents
