Wireless Lan Network Creation - Cerio OW-200N2 User Manual

Click Save button to save your changes. Then click Reboot button to activate your
changes.

3.4 Wireless LAN Network Creation

The network manager can configure related wireless settings, General Settings,
Advanced Settings, Virtual AP(VAP) Setting, Security Settings, and MAC Filter Settings.
3.4.1 Wireless General Setup
The administrator can change the data transmission, channel and output power
settings for the system. Please click on Wireless -> General Setup and follow the
below setting.
3.4.1.1 MAC address : The MAC address of the Wireless interface is displayed
here.
3.4.1.2 Band Mode : Select an appropriate wireless band; bands available are
801.11a or 802.11a/n mixed mode.
3.4.1.3 AP Isolation : Select Enable, all clients will be isolated from each VAP, that
means different VAP's clients can not reach to each other.
3.4.1.4 Transmit Rate Control : Select the desired rate from the drop-down list;
the options are auto or ranging from 6 to 54Mbps only for 802.11a mode.
3.4.1.5 Country : Select the desired country code from the drop-down list; the
options are US, UK, ETSI, JP and NONE.
3.4.1.6 Channel : The channel range will be changed by selecting different
country code. Below depicts the channel range for different Country.
Country
US
UK
ETSI
500mW eXtreme Power 11Na Outdoor Bridge
Channel
36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161
100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128,
132, 136, 140
89
User's Manual