Table of Contents
Advertisement
SNMP ro user : Set a community string to authorize read-only access.
SNMP ro password : Set a password to authorize read-only access.
SNMP rw user : Set a community string to authorize read/write access.
SNMP rw password : Set a password to authorize read/write access.
SNMP Trap : Events such as cold start, interface up & down, and association & disassociation will report to an
assigned server.
Community : Set a community string required by the remote host computer that will receive trap messages
or notices send by the system.
IP : Enter the IP addresses of the remote hosts to receive trap messages.
Click Save button to save changes and click Reboot button to activate.
500mW eXtreme Power 11Na Outdoor Bridge
57
User's Manual
Advertisement
Table of Contents
