Cerio OW-200N2 User Manual page 30

LAN IP : The administrator can manually setup the LAN IP address.
IP Address : The IP address of the LAN port; default IP address is 192.168.2.254
IP Netmask : The Subnet mask of the LAN port; default Netmask is 255.255.255.0
DHCP Setup : Devices connected to the system can obtain an IP address automatically when this service is
enabled.
DHCP : Check Enable button to activate this function or Disable to deactivate this service.
Start IP / End IP: Specify the range of IP addresses to be used by the DHCP server when assigning IP
address to clients. The default range IP address is 192.168.2.10 to 192.168.2.70, the netmask is
255.255.255.0
DNS1 IP : Enter IP address of the first DNS server; this field is required.
DNS2 IP : Enter IP address of the second DNS server; this is optional.
500mW eXtreme Power 11Na Outdoor Bridge
30
User's Manual