Table of Contents
Advertisement
7.4.4
Configure SNMP Setup
SNMP is an application-layer protocol that provides a message format for communication between SNMP managers
and agents. By enabling SNMP function, the administrator can obtain the system information remotely.
Please click on System -> SNMP Setup and follow the below setting.
SNMP v2c Enable: Check to enable SNMP v2c.
ro community : Set a community string to authorize read-only access.
rw community : Set a community string to authorize read/write access.
SNMP v3 Enable: Check to enable SNMP v3.
SNMPv3 supports the highest level SNMP security.
500mW eXtreme Power 11Na Outdoor Bridge
220
User's Manual
Advertisement
Table of Contents
