Table of Contents
Advertisement
User Name : Enter User Name for PPPoE connection
Password : Enter Password for PPPoE connection
Reconnect Mode :
•
Always on – A connection to Internet is always maintained.
•
On Demand – A connection to Internet is made as needed.
When Time Server is enabled at the "On Demand" mode, the "Reconnect Mode" will turn out "Always on".
•
Manual – Click the "Connect" button on "WAN Information" in the Overview page to connect to
the Internet.
Idle Time : Time to last before disconnecting PPPoE session when it is idle. Enter preferred Idle Time in
minutes. Default is "0", indicates disabled. When Idle time is disabled, the "Reconnect Mode" will turn
out "Always on"
MTU : By default, it's 1492 bytes. MTU stands for Maximum Transmission Unit. Consult with WISP for a
correct MTU setting.
PPTP :
The Point-to-Point Tunneling Protocol (PPTP) mode enables the
Virtual Private Networks (VPNs)
500mW eXtreme Power 11Na Outdoor Bridge
through public networks.
26
User's Manual
implementation of secure multi-protocol
Advertisement
Table of Contents
