Cerio OW-200N2 User Manual page 88

3.3.1.2 Dynamic IP: This configuration type is applicable when the OW-200N2is
connected to a network with the presence of a DHCP server; all related IP
information will be provided by the DHCP server automatically.
Hostname : The Hostname of the LAN port.
3.3.1.3 DNS: Check either "No Default DNS Server" or "Specify DNS Server IP"
button as desired to set up the system DNS.
Primary : The IP address of the primary DNS server.
Secondary : The IP address of the secondary DNS server.
3.3.1.4 802.1d Spanning Tree
The spanning tree network protocol provides a loop free topology for a bridged
LAN between LAN interface and 8 WDS interfaces from wds0 to wds7. The
Spanning Tree Protocol, which is also referred to as STP, is defined in the IEEE
Standard 802.1d.
500mW eXtreme Power 11Na Outdoor Bridge
88
User's Manual