Table of Contents
Advertisement
Maximum Clients : The default value is 32. You can enter the number of wireless clients that can associate to a
particular SSID. When the number of client is set to 5, only 5 clients at most are allowed to connect to this
Repeater AP.
Security Type : Select the desired security type from the drop-down list; the options are Disable, WEP,
WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise and WEP 802.1X.
7.3.1.1
Disable : Data are unencrypted during transmission when this option is selected.
7.3.1.2
WEP : Wired Equivalent Privacy(WEP) is a data encryption mechanism based on a 64-bit
or 128-bit shared key.
Authentication Method : Enable the desire option among OPEN, SHARED or WEPAUTO.
Key Index : key index is used to designate the WEP key during data transmission. 4 different WEP
keys can be entered at the same time, but only one is chosen.
WEP Key # : Enter HEX or ASCII format WEP key value; the system supports up to 4 sets of WEP
keys.
Key Length
64-bit
128-bit
7.3.1.3
WPA-PSK (or WPA2-PSK) : WPA (or WPA2) Algorithms, allows the system accessing the
network by using the WPA-PSK protected access.
500mW eXtreme Power 11Na Outdoor Bridge
Hex
10 characters
26 characters
207
User's Manual
ASCII
5 characters
13 characters
Advertisement
Table of Contents
