6.
Client Bridge Mode
When Client Bridge is chosen, the system can be configured as a Client Bridge and support Repeater AP
function. This can setup VLAN and DHCP server in the system menu.
6.1 Change Setup mode
If the administrator needs to switch to Client Bridge mode, Please click "System"-> " Mode Setup " to
change Client Bridge mode.
Please note that the LAN IP addresses in each mode are different from each
other and will not continue. For the first time after switching modes, always
perform access management on the LAN default IP address of 192.168.2.254
This section provides detailed explanation for users to configure in the Client Bridge Mode and Repeater AP
function with help of illustrations.
6.2 Configure LAN Setup
Here are the instructions for how to setup the local IP Address and Netmask. Please click on System ->
LAN and follow the below setting.
V4.0