Wireless Network Expansion - Cerio OW-200N2 User Manual

The wireless clients in the "Enable" list will be allowed to access the Access Point; All others or clients in the
"Disable" list will be denied.
Only Deny List MAC.
The wireless clients in the "Enable" list will be denied to access the Access Point; All others or clients
"Disable" list will be allowed.
Add a station MAC : Enter MAC address (e.g. aa:bb:cc:00:00:0a) and click "Add" button, then the MAC address
should display in the "Enable" List.
There are a maximum of 20 clients allowed in this "Enable" List. The MAC addresses of the wireless clients can be
added and removed to the list using the Add and Remove buttons.
Click Reboot button to activate your changes
MAC Access Control is the weakest security approach. WPA and WPA2 security method is highly
recommended.

2.3 Wireless Network Expansion

The administrator could create WDS Links to expand wireless network. When WDS is enabled, access point
functions as a wireless bridge and is able to communicate with other access points via WDS links. A WDS link is
bidirectional and both side must support WDS. Access points know each other by MAC Address. In other
words, each access point needs to include MAC address of its peer. Ensure all access points are configured
with the same channel and own same security type settings.
500mW eXtreme Power 11Na Outdoor Bridge
48
User's Manual
in the