Cerio OW-200N2 User Manual page 102

3.6.2.6 VLAN Tag(ID) : By default, it's selected "Disable".
This system supports tagged Virtual LAN(VLAN). A valid number of 1 to 4094
can be entered after it's enabled. If your network utilize VLANs you could tie a
VLAN ID to a specific SSID, and packets from/to wireless clients belonging to
that SSID will be tagged with that VLAN ID. This enables security of wireless
applications by applying VLAN ID.
3.6.3 Security Type : Select the desired security type from the drop-down list; the options
are Disable, WEP, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise and
WEP 802.1X.
3.6.3.1 Disable : Data are unencrypted during transmission when this option is
selected.
3.6.3.2 WEP : Wired Equivalent Privacy(WEP) is a data encryption mechanism
based on a 64-bit or 128-bit shared key.
Authentication Method : Enable the desire option among OPEN, SHARED
or WEPAUTO.
Key Index : Skey index is used to designate the WEP key during data
transmission. 4 different WEP keys can be entered at the same time, but only
one is chosen.
WEP Key # : Enter HEX or ASCII format WEP key value; the system
supports up to 4 sets of WEP keys.
Key Length
64-bit
128-bit
500mW eXtreme Power 11Na Outdoor Bridge
Hex ASCII
10 characters 5 characters
26 characters 13 characters
102
User's Manual