Cerio OW-200N2 User Manual page 60

2.4.7 Network Utility
The administrator can diagnose network connectivity via the PING and TRACEROUTE utility.
Please click on Utilities -> Network Utility and follow the below setting
Ping : This utility will help ping other devices on the network to verify connectivity. Ping utility, using ICMP
packets, detects connectivity and latency between two network nodes. As result of that, packet loss and latency
time are available in the Result field while running the PING test.
Destination IP/Domain : Enter desired domain name, i.e. www.google.com, or IP address of the destination,
and click ping button to proceed. The ping result will be shown in the Result field.
Count : By default, it's 5 and the range is from 1 to 50. It indicates number of connectivity test.
Traceroute : Allows tracing the hops from the OW-200N2 device to a selected outgoing IP
address. It should be used for the finding the route taken by ICMP packets across the network to the destination
host. The test is started using the Start button, click Stop button to stopped test
Destination Host : Specifies the Destination Host for the finding the route taken by ICMP packets across
the network.
MAX Hop : Specifies the maximum number of hops( max time-to-live value) traceroute will probe.
500mW eXtreme Power 11Na Outdoor Bridge
60
User's Manual