Table of Contents
Advertisement
Configuration in WDS Mode (Pure WDS)
1.3.3
An access point can be either a main, relay or remote base station. A main base
station is typically connected to a wired network via the Ethernet port. A relay base
station relays data between main base stations and relay stations or remote base
stations with clients. A remote base station is the end point to accept connections
from wireless clients and pass data upwards to a network wirelessly. In this mode, it
can support single or multiple WDS links and no wireless clients can associate with it
though.
1.3.3.1
Example 1: Point-to-Point
]
1.3.3.2
Example 2: Point-to-Multi-Point
500mW eXtreme Power 11Na Outdoor Bridge
8
User's Manual
Advertisement
Table of Contents
