Table of Contents
Advertisement
time out, the cached key will be deleted.
•
Pre-Authentication : By default, it's "Disable". To Enable is use to speed up roaming before
pre-authenticating IEEE 802.1X/EAP part of the full RSN authentication and key handshake before
actually associating with a new AP.
PMK Cache Period and Pre-Authentication is used in WPA2-Enterprise
Radius Server Settings :
•
IP Address : Enter the IP address of the Authentication RADIUS server.
•
Port : By default, it's 1812. The port number used to communicate with RADIUS server.
•
Shared secret : A secret key used between system and RADIUS server. Supports 8 to 64
characters.
•
Session Timeout : The Session timeout is in the range of 0~60 seconds. The default is 0 to
disable re-authenticate service.
Amount of time before a client will be required to re-authenticate.
WEP 802.1X : When WEP 802.1x Authentication is enabled, please refer to the following Dynamic WEP and
RADIUS settings to complete configuration.
Radius Server Settings :
•
IP Address : Enter the IP address of the Authentication RADIUS server.
500mW eXtreme Power 11Na Outdoor Bridge
46
User's Manual
Advertisement
Table of Contents
