Table of Contents
Advertisement
6.3.3 HT Physical Mode: By default, it's Mixed Mode.
6.3.3.1
Operation Mode
Mixed Mode : In this mode packets are transmitted with a preamble
compatible with the legacy 802.11a/g, the rest of the packet has a new format.
In this mode the receiver shall be able to decode both the Mixed Mode
packets and legacy packets.
Green Field : In this mode high throughput packets are transmitted without a
legacy compatible part.
6.3.3.2
Channel Bandwidth : The "20/40" MHz option is usually best. The other
option is available for special circumstances.
6.3.3.3
Guard Interval : Using "Auto" option can increase throughput. However, it
can also increase error rate in some installations, due to increased sensitivity
to radio-frequency reflections. Select the option that works best for your
installation.
6.3.3.4
MCS : This parameter represents transmission rate. By default (Auto) the
fastest possible transmission rate will be selected. You have the option of
selecting the speed if necessary.
6.3.3.5
Reverse Direction Grant(RDG) : Disable or enable reserve direction grant.
Default is enabled.
6.3.3.6
A-MSDU : Aggregated Mac Service Data Unit. Select Enable to allow
aggregation for multiple MSDUs in one MPDU Default is disabled.
6.3.3.7
Auto Block ACK : Disable or enable auto block ACK. Default is enabled.
6.3.3.8
Decline BA Request : Disable or enable decline BA request. Default is
disabled.
Change these settings as described here and click Save button to save your
500mW eXtreme Power 11Na Outdoor Bridge
163
User's Manual
Advertisement
Table of Contents
