Configure Lan Setup - Cerio OW-200N2 User Manual

5.3 Configure LAN Setup

Here are the instructions for how to setup the local IP Address and Netmask. Please click
on System -> LAN and follow the below setting.
5.3.1 LAN IP : The administrator can manually setup the LAN IP address.
5.3.1.1 IP Address : The IP address of the LAN port; default IP address is
192.168.2.254
5.3.1.2 IP Netmask : The Subnet mask of the LAN port; default Netmask is
255.255.255.0
5.3.2 802.1d Spanning Tree
The spanning tree network protocol provides a loop free topology for a bridged LAN
between LAN interface. The Spanning Tree Protocol, which is also referred to as STP,
is defined in the IEEE Standard 802.1d.
500mW eXtreme Power 11Na Outdoor Bridge
136
User's Manual