Station Site Survey - Cerio OW-200N2 User Manual

0
No
Restriction
5.5.4.8 A-MSDU : Aggregated Mac Service Data Unit, A-MSDU. Select Enable to
allows aggregation for multiple MSDUs in one MPDU. Default is disabled.
Click Save button to save your changes. Click Reboot button to activate your
changes.

5.6 Station Site Survey

Use this tool to scan and locate WISP Access Points and select one to associate with.
Please click on Wireless -> Site Survey. Below depicts an example for site survey.
5.6.1 ESSID : Available Extend Service Set ID of surrounding Access Points.
5.6.2 MAC Address : MAC addresses of surrounding Access Points.
5.6.3 Signal : Received signal strength of all found Access Points.
5.6.4 Channel : Channel numbers used by all found Access Points.
5.6.5 Security : Security type by all found Access Points.
5.6.6 Band : Wireless band used by all found Access Points.
5.6.7 Network Type : Network type used by all found Access Points.
5.6.8 Select : Click "Select" to configure settings and associate with chosen AP.
Notice: While clicking "Select" button in the Site Survey Table, the "ESSID" and
"Security Type" will apply in the Wireless General Setup. However, more settings
are needed including Security Key.
500mW eXtreme Power 11Na Outdoor Bridge
1 2 3
¼ µs ½ µs 1 µs
141
4 5 6
2 µs 4 µs 8 µs
User's Manual
7
16 µs