Table of Contents
Advertisement
Enable this option to stop the SSID broadcast in your network. When disabled, people could
easily obtain the SSID information with the site survey software and get access to the network if
security is not turned on. When enabled, network security is enhanced. It's suggested to enable it
after AP security settings are archived and setting of AP clients could make to associate to it.
Maximum Clients : The default value is 32. You can enter the number of wireless clients that can associate to a
particular SSID. When the number of client is set to 5, only 5 clients at most are allowed to connect to this VAP.
In this mode, the system does not support VLAN Tag(ID) function.
Security Type : Select the desired security type from the drop-down list; the options are Disable, WEP,
WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise and WEP 802.1X.
Disable : Data are unencrypted during transmission when this option is selected.
WEP : Wired Equivalent Privacy(WEP) is a data encryption mechanism based on a 64-bit or 128-bit shared
Authentication Method : Enable the desire option among OPEN, SHARED or WEPAUTO.
Key Index : Key index is used to designate the WEP key during data transmission. 4 different WEP keys
can be entered at the same time, but only one is chosen.
WEP Key # : Enter HEX or ASCII format WEP key value; the system supports up to 4 sets of WEP keys.
Key Length
64-bit
128-bit
WPA-PSK (or WPA2-PSK) : WPA (or WPA2) Algorithms, allows the system accessing the network by using
the WPA-PSK protected access.
Hex
ASCII
10 characters
5 characters
26 characters
13 characters
500mW eXtreme Power 11Na Outdoor Bridge
44
User's Manual
key.
Advertisement
Table of Contents
