Wireless Lan Network Creation - Cerio OW-200N2 User Manual

7.3 Wireless LAN Network Creation

The network manager can configure related wireless settings, Repeater AP Setup, Security Settings, and MAC
Filter Settings.
7.3.1 Repeater AP Setup
Administrators can configure ESSID, SSID broadcasting, Maximum number of client associations, security type
settings and MAC Filter settings.
Enable Repeater AP : By default, it's "Enable" for repeater AP. Select "Enable" to activate Repeater AP or click
"Disable" to deactivate this function
ESSID : Extended Service Set ID, When clients are browsing for available wireless networks, this is the SSID
that will appear in the list. ESSID will determine the service type available to AP's clients associated with the
specified AP.
Client Isolation : By default, it's "Disable".
Select "Enable", all clients will be isolated from each other, which means they can't reach each other.
Hidden SSID : By default, it's "Disable".
Enable this option to stop the SSID broadcast in your network. When disabled, people could easily obtain the
SSID information with the site survey software and get access to the network if security is not turned on. When
enabled, network security is enhanced. It's suggested to enable it after AP security settings are archived and
setting of AP's clients could make to associate to it.
500mW eXtreme Power 11Na Outdoor Bridge
206
User's Manual