Table of Contents
Advertisement
5.5 Configure Wireless General Setting
The administrator can change the data transmission, channel and output power settings
for the system. Please click on Wireless -> General Setup and follow the below setting.
5.5.1 Band Mode : Select an appropriate wireless band; bands available are 801.11aor
802.11a/n mixed mode.
5.5.2 Country : Select the desired country code from the drop-down list; the options are US,
UK, ETSI, JP and NONE.
5.5.3 Tx Power : You can adjust the output power of the system to get the appropriate
coverage for your wireless network. Specify digit number between 1 to 100 (the unit is
%) for your environment. If you are not sure of which setting to choose, then keep the
default setting, 100%.
500mW eXtreme Power 11Na Outdoor Bridge
139
User's Manual
Advertisement
Table of Contents
