Ap Mode Configuration; Chose Your Operating Mode; External Network Connection - Cerio OW-200N2 User Manual

3 AP Mode Configuration

When AP mode is chosen, the system can be configured as an Access Point. This section
provides detailed explanation for users to configure in the AP mode with help of illustrations.
In the AP mode, functions listed in the table below are also available from the Web-based GUI
interface.

3.1 Chose Your Operating Mode

OW-200N2 500mW eXtreme Power 11N/a Outdoor Bridge supports four operational
modes, the AP mode, the WDS mode, the CPE mode and the Client Bridge +
Universal Repeater mode, respectively with built-in remote management features.
The system administrator can set the desired mode via this page, and then configure the
system according to their deployment needs, Please click on System -> Operating Mode
and follow the below setting.

3.2 External Network Connection

3.2.1 Network Requirement
Normally, OW-200N2 connects to a wired LAN and provides a wireless connection
point to associate with wireless client. Then, Wireless clients could access to LAN or
Internet by associating themselves with OW-200N2 set in AP mode.
500mW eXtreme Power 11Na Outdoor Bridge
85
User's Manual