Router Ap Mode Configuration; External Network Connection - Cerio OW-200N2 User Manual

2 Router AP Mode Configuration

2.1 External Network Connection

2.1.1 Network Requirement
It can be used as an Router AP with WDS function. In this mode, OW-200N2 is a
gateway enabled with NAT and DHCP Server functions. The wireless clients
connected to Internet.
2.1.2 Configure WAN Setup
It can be used as an Router AP with WDS function. In this mode, OW-200N2 is a
gateway enabled with NAT and DHCP Server functions. The wireless clients
connected to Internet.
There are three connection types for the WAN port : Static IP, Dynamic IP, PPPoE and PPTP.
Please click on System -> WAN and follow the below setting.
In Router AP mode, the WAN Port is the wired interface.
Mode : By default, it's "Static IP". Check "Static IP", "Dynamic IP", "PPPoE" or "PPTP"to set up system WAN IP.
500mW eXtreme Power 11Na Outdoor Bridge
24
User's Manual