Cerio OW-200N2 User Manual page 200

500mw extreme power 11na outdoor bridge
Table of Contents

Advertisement

value for "cwmax" must be higher than the value for "cwmin".
Txop : Transmission Opportunity is an interval of time when a WME AP has the right to initiate
transmissions onto the wireless medium (WM). This value specifies (in milliseconds) the Transmission
Opportunity (TXOP) for AP; that is, the interval of time when the WMM AP has the right to initiate
transmissions on the wireless network.
ACM : Admission Control Mandatory, ACM only takes effect on AC_VI and AC_VO. When you do not
click Checkbox, it means that the ACM is controlled by the connecting AP. If you click Checkbox, it
means that the Client is in charge.
AckPolicy : Acknowledgment Policy, WMM defines two ACK policies: Normal ACK and No ACK. Click
"Checkbox" indicates "No ACK"
When the no acknowledgment (No ACK) policy is used, the recipient does not acknowledge received
packets during wireless packet exchange. This policy is suitable in the environment where
communication quality is fine and interference is weak. While the No ACK policy helps improve
transmission efficiency, it can cause increased packet loss when communication quality deteriorates.
This is because when this policy is used, a sender does not retransmit packets that have not been
received by the recipient.
When the Normal ACK policy is used, the recipient acknowledges each received unicast packet.
WMM Parameters of Station : This affects traffic flowing from the client station to the access point.
Data Transmitted
Queue
Clients to AP
AC_BK
Background.
AC_BE
Best Effort
AC_VI
Video
AC_VO
Voice
Aifsn : The Arbitration Inter-Frame Spacing Number specifies a wait time (in milliseconds) for data
500mW eXtreme Power 11Na Outdoor Bridge
Priority
High throughput. Bulk data that requires maximum throughput and is not
Low
time-sensitive is sent to this queue (FTP data, for example).
Medium Medium throughput and delay. Most traditional IP data is sent to this queue
High
Minimum delay. Time-sensitive video data is automatically sent to this queue
Time-sensitive data like VoIP and streaming media are automatically sent to this
High
queue
200
User's Manual
Description

Advertisement

Table of Contents
loading

Table of Contents