Table of Contents
Advertisement
On Demand – A connection to Internet is made as needed.
Notice: When Time Server is enabled at the "On Demand" mode, the "Reconnect
Mode" will turn out "Always on".
Manual – Click the "Connect" button on "WAN Information" in the Overview
page to connect to the Internet.
5.2.4.4
Idle Time : Time to last before disconnecting PPPoE session when it is idle.
Enter preferred Idle Time in minutes.
5.2.4.5
MTU : By default, it's 1492 bytes. MTU stands for Maximum Transmission
Unit. Consult with WISP for a correct MTU setting.
5.2.5 DNS : Check "No Default DNS Server" or "Specify DNS Server IP" radial button as
desired to set up system DNS.
5.2.5.1
Primary : The IP address of the primary DNS server.
5.2.5.2
Secondary : The IP address of the secondary DNS server.
5.2.6 MAC Clone : The MAC address is a 12-digit HEX code uniquely assigned to
hardware as identification. Some ISPs require you to register a MAC address in order
to access to Internet. If not, you could use default MAC or clone MAC from a PC.
5.2.6.1
Keep Default MAC Address : Keep the default MAC address of WAN port
on the system.
5.2.6.2
Clone MAC Address : If you want to clone the MAC address of the PC,
then click the Clone MAC Address button. The system will automatically detect
your PC's MAC address.
500mW eXtreme Power 11Na Outdoor Bridge
134
User's Manual
Advertisement
Table of Contents
