Table of Contents
Advertisement
6.2.6 DHCP Setup : Devices connected to the system can obtain an IP address
automatically when this service is enabled.
6.2.6.1
DHCP : Check Enable button to activate this function or Disable to
deactivate this service.
6.2.6.2
Start IP / End IP: Specify the range of IP addresses to be used by the
DHCP server when assigning IP address to clients. The default range IP
address is 192.168.2.10 to 192.168.2.70, the netmask is 255.255.255.0
6.2.6.3
DNS1 IP : Enter IP address of the first DNS server; this field is required.
6.2.6.4
DNS2 IP : Enter IP address of the second DNS server; this is optional.
6.2.6.5
WINS IP : Enter IP address of the Windows Internet Name Service (WINS)
server; this is optional.
6.2.6.6
Domain : Enter the domain name for this network.
6.2.6.7
Lease Time : The IP addresses given out by the DHCP server will only be
valid for the duration specified by the lease time. Increasing the time ensure
client operation without interruptions, but could introduce potential conflicts.
Lowering the lease time will avoid potential address conflicts, but might cause
more interruptions to the client while it will acquire new IP addresses from the
DHCP server. Default is 86400 seconds
Click Save button to save your changes. Click Reboot button to activate your
changes.
500mW eXtreme Power 11Na Outdoor Bridge
161
User's Manual
Advertisement
Table of Contents
