Cerio OW-200N2 User Manual page 253

HTTP Port: The default is 80 and the range is between 1 ~ 65535.
Enable HTTPS: Check to select HTTPS Service.
HTTPS Port: The default is 443 and the range is between 1 ~ 65535.
Notice: If you already have an SSL Certificate, please click "UploadKey" button
to select the file and upload it.
Enable Telnet : Check to select Telnet Service.
Telnet Port: The default is 23 and the range is between 1 ~ 65535.
Enable SSH: Check to select SSH Service.
SSH Port: Please the default is 22 and the range is between 1 ~ 65535.
Notice: Click "GenerateKey" button to generate RSA private key. The "host key
footprint" gray blank will display content of RSA key.
Click Save button to save your changes. Click Reboot button to activate your
changes
Without a valid certificate, users may encounter the following problem in IE7 when
they try to access system's WMI (https://192.168.2.254). There will be a "Certificate
Error", because the browser treats system as an illegal website.
Click "Continue to this website" to access the system's WMI. The system's
500mW eXtreme Power 11Na Outdoor Bridge
253
User's Manual