Table of Contents
Advertisement
to add in the MAC group of each rule. Click "Remove" button can remove MAC address in the group of each
rule. There are 10 MAC address maximum allowed in each rule.
Local / Destination IP : Specify local(LAN)/ destination IP addresses range required for this rule. If you
specify local IP addresses range from 192.168.1.1 to 192.168.2.254. The matches a range of local IP
addresses include every single IP address from the first to the last, so the example above includes
everything from 192.168.1.1 to 192.168.2.254.
Protocol : Select Any or specify protocol(TCP, UDP, ICMP, URL Blocking and Application) from
drop-down list. When you select ICMP or Layer 7 Application , the Local(LAN)/ Destination Port can not
used.
If you want to block websites with specific URL address or using specific keywords, enter each URL or
keyworks in the "URL Blocking" field and click "Add" button to add in the URL Blocking list of each rule.
Click "Remove" button can remove URL or keywords.
Local Port : Specify local port(LAN port) range required for this rule
Destination Port : Specify destination port range required for this rule
Active : Check Enable button to activate this rule, and Disable to deactivate.
Click "Add" button to add control rule to List. There are 10 rules maximum allowed in this Control List. All rules can be
removed or edited on the List. Click Reboot button to activate your changes.
500mW eXtreme Power 11Na Outdoor Bridge
66
User's Manual
Advertisement
Table of Contents
