Configure Ow-200N2 Lan Ip Address - Cerio OW-200N2 User Manual

4.2 Configure OW-200N2 LAN IP Address

Here are the instructions to setup the local IP Address and Netmask.
Please click on System -> LAN and follow the below setting.
4.2.1 Ethernet Connection Type:
Check either "Static IP" or "Dynamic IP" button as desired to set up the system IP of
LAN port.
4.2.1.1 Static IP: The administrator can manually setup the LAN IP address when
static IP is available/ preferred.
IP Address : The IP address of the LAN port; default IP address is
192.168.2.254
IP Netmask : The Subnet mask of the LAN port; default Netmask is
255.255.255.0
IP Gateway : The default gateway of the LAN port; default Gateway is
500mW eXtreme Power 11Na Outdoor Bridge
112
User's Manual