Configure Upnp - Cerio OW-200N2 User Manual

User's Manual
500mW eXtreme Power 11Na Outdoor Bridge

2.4.3 Configure UPnP

Universal Plug and Play(UPnP) is an architecture to enable pervasive peer-to-peer network connectivity between
PCs, intelligent devices and appliances when UPnP is supported. UPnP works on TCP/IP network to enable UPnP
devices to connect and access to each other, very well adopted in home networking environment.
UPnP : By default, it's "Disable". Select "Enable" or "Disable" of UPnP Service.
Click Save button to save changes and click Reboot button to activate changes
For UPnP to work in Windows XP, the "OW-200N2" must be available in "My Network Places", as shown here: (your
specific model may vary)
If these devices are not available, you should verify that the correct components and services are loaded in Windows
XP. Please refer to Appendix E. Using UPnP on Windows XP
55