Product Specification - Cerio OW-200N2 User Manual

Product Specification

Network Standards
Conformance
Network Standards
Conformance
Ethernet Configuration
LED Indicators
Data Transfer Rate
Frequency Range
Channel Spacing
Media Access Protocol
Modulation Method
Operating Channels
500mW eXtreme Power 11Na Outdoor Bridge
Hardware Specifications
IEEE 802.11 a/n (draft 2.0) compliant
IEEE 802.3 / IEEE 802.3u
IEEE 802.11a/n compliant
IEEE802.11f IAPP (Inter Access Point Protocol), hand over
users to another AP
IEEE 802.11i Preauth (PMKSA Cache )
IEEE 802.11h -Transmission Power Control
IEEE 802.11d -Multi country roaming
Weatherproof Ethernet Connector x 1
LEDs Wireless Signal Strength x 3
Wireless Specifications
IEEE802.11a :6/ 9/ 12/ 18/ 24/ 36/ 48/ 54Mbps (auto sensing)
IEEE801.11n(draft 2.0) : 300Mbps (Tx), 300Mbps (Rx)
IEEE802.11a :
5.150 – 5.350 & 5.725 – 5.825 GHz(USA)
4.900 – 5.250 GHz(Japan)
5.150 – 5.350 & 5.470 – 5.725GHz (Europe ETSI)
IEEE802.11n :
5.150 – 5.350 & 5.725 – 5.825 GHz(USA)
4.900 – 5.250 GHz(Japan)
5.150 – 5.350 & 5.470 – 5.725GHz (Europe ETSI)
IEEE802.11a : 20MHz
IEEE802.11n : 20/40MHz
CSMA / CA with ACK
IEEE 802.11a : OFDM with BPSK, QPSK, QAM and 64QAM
IEEE 802.11n : BPSK, QPSK, 16-QAM, 64-QAM
IEEE 802.11a :
US: 12 (CH: 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161)
Japan: 4 (CH: 34, 38, 42, 46)
ETSI: 19 (CH: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112,
116,
IEEE 802.11n @ 5GHz :
288
120, 124, 128, 132, 136, 140)
User's Manual