8.3 Configure UPnP
Universal Plug and Play (UPnP) is an architecture to enable pervasive peer-to-peer
network connectivity between PCs, intelligent devices and appliances when UPnP is
supported. UPnP works on TCP/IP network to enable UPnP devices to connect and
access to each other, very well adopted in home networking environment.
8.3.1 UPnP : By default, it's "Disable". Select "Enable" or "Disable" of UPnP Service.
Click Save button to save changes and click Reboot button to activate changes.
For UPnP to work in Windows XP, the "OW-200N2" must be available in "My Network
Places", as shown here: (your specific model may vary)
If these devices are not available, you should verify that the correct components and
services are loaded in Windows XP.
500mW eXtreme Power 11Na Outdoor Bridge
256
User's Manual