Cerio OW-200N2 User Manual page 133

5.2.2 Static IP : Users can manually setup the WAN IP address with a static IP provided by
WISP.
5.2.2.1 IP Address : The IP address of the WAN port; default IP address is
192.168.1.254
5.2.2.2 IP Netmask : The Subnet mask of the WAN port; default Netmask is
255.255.255.0
5.2.2.3 IP Gateway : The default gateway of the WAN port; default Gateway is
192.168.1.1
5.2.3 Dynamic IP : Please consult with WISP for correct wireless settings to associate with
WISP AP before a dynamic IP, along with related IP settings including DNS can be
available from DHCP server. If IP Address is not assigned, please double check with
your wireless settings and ensure successful association. Also, you may go to
"WAN Information" in the Overview page to click Release button to release IP
address and click Renew button to renew IP address again.
5.2.3.1 Hostname : The Hostname of the WAN port
5.2.4 PPPoE : To create wireless PPPoE WAN connection to a PPPoE server in network.
5.2.4.1 User Name : Enter User Name for PPPoE connection
5.2.4.2 Password : Enter Password for PPPoE connection
5.2.4.3 Reconnect Mode :
Always on – A connection to Internet is always maintained.
500mW eXtreme Power 11Na Outdoor Bridge
133
User's Manual