Voice Synthesizer Language; Voice Synthesizer Speed; Meter Level Speech; Ci-V Address Setting - Icom IC-703 Instruction Manual

Hf/50 mhz all mode transceiver

Hide thumbs Also See for IC-703:

Service manual (78 pages)

Installing manual (5 pages)

Instruction manual (9 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

Table of Contents

When the optional UT-102

installed, you can select between English and Japan-

ese as the language.

When the optional UT-102

installed, you can select the speech speed of synthe-

sizer output between faster or slower.

When an optional UT-102

is installed, the synthesizer can be set to read out the

frequency/mode only, or both the frequency/mode

and S-meter level.

To distinguish equipment, each CI-V transceiver has

its own Icom standard address in hexadecimal code.

The IC-703's address is 68H.

When 2 or more IC-703's are connected to an op-

tional CT-17

V LEVEL CONVERTER

dial to select a different address for each IC-703 in

the range 01H to 7FH.

This item sets the data transfer rate. When "Auto" is

selected, the baud rate is automatically set according

to the connected controller or remote controller.

Transceiver operation is possible with the IC-703 con-

nected to other Icom HF transceivers or receivers.

When "on" is selected, changing the frequency, oper-

ating mode, etc. on the IC-703 automatically changes

those of connected transceivers (or receivers) and

vice versa.

When connecting the IC-703 to the IC-735 for trans-

ceiver operation, you must change the operating fre-

quency data length to 4 bytes.

• This item

be set to "on" only when operating trans-

MUST

ceiver with the IC-735.

When "