Appendix; Feature Support By Protocol For Cisco Unified Ip Phone 7962G And 7942G - Cisco 7942G Administration Manual

Feature Support by Protocol for Cisco Unified
IP Phone 7962G and 7942G
This appendix provides information about feature support for the Cisco Unified IP Phone 7962G and
7942G using the SCCP or SIP protocol with Cisco Unified Communications Manager Release 6.1(3).
Table B-1
focuses primarily on end-user calling features and is not intended to represent a comprehensive listing
of all available phone features. For details about user interface differences and feature use, refer to the
Cisco Unified IP Phone 7962G and 7942G Phone Guide for Cisco Unified Communications Manager
6.1(3).
This guide is available at this URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html
The specific sections that describe the features in the phone guide are referenced in
Table B-1 Cisco Unified IP Phone 7962G and 7942G Feature Support by Protocol
Features
Calling Features
Abbreviated Dialing
Anonymous Call Block
Audible Message Waiting
Indicator
Auto Answer
Auto-pickup
Auto Dial
Barge (and cBarge)
Block external to external
transfer
Busy Lamp Field (BLF)
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17679-01
provides a high-level overview of calling features and their support by protocol. This table
Cisco Unified IP Phones 7962G, 7942G
SCCP SIP
Supported Supported
Not supported Supported
Supported Supported
Supported Supported
Supported Supported
Supported Supported
Supported Supported
Supported Supported
Supported Supported
A P P E N D I X
For More Information
"Basic Call Handling—Placing a Call: Additional
Options"
"Accessing Voice Messages"
"Using a Handset, Headset, and
Speakerphone—Using Auto Answer"
"Basic Call Handling—Placing a Call: Basic
Options"
"Advanced Call Handling—Using a Shared Line"
"Advanced Call Handling—Using BLF to
Determine a Line State"
B
Table B-1.
B-1