Appendix; Feature Support By Protocol For The Cisco Unified Ip Phone 6901 And 6911 - Cisco 6901 Administration Manual

Feature Support by Protocol for the Cisco
Unified IP Phone 6901 and 6911
This appendix provides information about feature support for the Cisco Unified IP Phones 6901 and
6911 using the SCCP or SIP protocol with Cisco Unified Communications Manager Release 8.6.
Table G-1
focuses primarily on end-user calling features and is not intended to represent a comprehensive listing
of all available phone features. For details about user interface differences and feature use, refer to the
Cisco Unified IP Phone user guide.
The guide is available at this URL:
http://www.cisco.com/en/US/products/ps10326/tsd_products_support_series_home.html
The specific sections that describe the features in the phone guide are referenced in
Table G-1 Cisco Unified IP Phones Feature Support by Protocol
Features
Calling Features
Agent Greeting
Audible Message Waiting
Indicator (AMWI)
Auto Answer
(Cisco Unified IP Phone
6911 only)
Automatic Port
Synchronization
(Cisco Unified IP Phone
6911 only)
cBarge
Block external to external
transfer
Call Back
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24582-01
provides a high-level overview of calling features and their support by protocol. This table
Protocol
SCCP SIP
Supported Supported
Supported Supported
Supported Supported
Supported Supported
Supported Supported
Supported Supported
Supported Supported
A P P E N D I X
For More Information
Basic Call Handling—Answering a Call
Accessing Voice Messages
Using a Handset, Headset, and
Speakerphone—Using Auto Answer
Advanced Call Handling—Using a Shared Line
Basic Call Handling—Placing a Call: Additional
Options
G
Table G-1.
G-1