Add User Directly To Cisco Unified Communications Manager - Cisco 9971 Administration Manual

If you do not synchronize the LDAP Directory to the Cisco Unified Communications Manager immediately,
Note
the LDAP Directory Synchronization Schedule on the LDAP Directory window determines when the next
autosynchronization is scheduled. Synchronization must occur before you can associate a new user to a
device.
Procedure
Step 1 Sign into Cisco Unified Communications Manager Administration.
Step 2 Select System > LDAP > LDAP Directory.
Step 3 Use Find to locate your LDAP directory.
Step 4 Click on the LDAP directory name.
Step 5
Click Perform Full Sync Now.

Add User Directly to Cisco Unified Communications Manager

If you are not using a Lightweight Directory Access Protocol (LDAP) directory, you can add a user directly
with Cisco Unified Communications Manager Administration by following these steps.
If LDAP is synchronized, you cannot add a user with Cisco Unified Communications Manager
Note
Administration.
Procedure
Step 1 From Cisco Unified Communications Manager Administration, choose User Management > End User.
Step 2 Click Add New.
Step 3
In the User Information pane, enter the following:
• User ID: Enter the end user identification name. Cisco Unified Communications Manager does not
permit modifying the user ID after it is created. You may use the following special characters: =, +, <,
>, #, ;, \, , "", and blank spaces. Example: johndoe
• Password and Confirm Password: Enter five or more alphanumeric or special characters for the end user
password. You may use the following special characters: =, +, <, >, #, ;, \, , "", and blank spaces.
• Last Name: Enter the end user last name. You may use the following special characters: =, +, <, >, #, ;,
\, , "", and blank spaces. Example: doe
• Telephone Number: Enter the primary directory number for the end user. End users can have multiple
lines on their phones. Example: 26640 (John Doe's internal company telephone number)
Step 4 Click Save.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
Add Users to Cisco Unified Communications Manager
93