San Volume Controller 2145-8G4 Parts; The San Volume Controller 2145-8A4; Frus That Are Not Exchanged Within San Volume Controller 2145-8A4 Service Procedures - IBM SAN Volume Controller Hardware Maintenance Manual

Table 6. FRUs that are exchanged within SAN Volume Controller 2145-8A4 service procedures (continued)
Assembly index
-
-
-
-
-
Table 7. FRUs that are not exchanged within SAN Volume Controller 2145-8A4 service procedures
Assembly index
-
-
-
1
9
11
14
16
17
-
-
-
-

SAN Volume Controller 2145-8G4 parts

You might need to replace a SAN Volume Controller 2145-8G4 field replaceable unit (FRU).
Figure 3 on page 9 shows how the different parts of the SAN Volume Controller 2145-8G4 are assembled.
8
IBM SAN Volume Controller Hardware Maintenance Guide
Part number
31P1177
12R9914
12R9915
59P4739
41Y9292
Part number
32P9107
31P1171
43W5119
42C1284
42C1286
43W5115
39M6296
43W5117
43W5116
42C1282
43W5113
43W5114
39M4351
Units Description
1 Power cable assembly
(SAN Volume Controller to
the 2145 UPS-1U).
The SAN Volume
Controller 2145-8A4 does
not work with previous
versions of the power cable
assembly. The correct
power cable assembly is
indicated by the red tape
that is used to bind the
cables together.
1 External fibre-channel
cable, LC–LC, 5.0 m (16.4
ft)
1 External fibre-channel
cable, LC–LC, 25.0 m (82 ft)
1 Alcohol wipe
1 Thermal grease
Quantity Description
1 Support rail kit
1 Cable retention bracket
1 Chassis
1 Top cover
1 Drive cage
1 Front bezel
1 Air baffle
1 Heat-sink assembly
retention module
1 Heat-sink assembly
1 3.5 in. SATA service label
1 Service label
1 CRU/FRU label
2 Bracket ear