Advertisement
Quick Links
Advertisement
Related Manuals for IBM Storwize V7000 Unified2073-720
Summary of Contents for IBM Storwize V7000 Unified2073-720
- Page 1 IBM Storwize V7000 Unified Model 2073-720 Quick Start Guide GI13-2867-00...
- Page 3 --serviceip2=123.123.123.12 --gw=<Gateway IP for this --internalips=169.254.8.1 subnet> --storwizeip=123.123.123.20 --serviceip1=<Storwize V7000 Unified file module 1 IP> --serviceip2=<Storwize V7000 Unified file module 2 IP> --internalips=<first IP of the internal IP address range> --storwizeip=<Storwize V7000 storage controller IP> © Copyright IBM Corp. 2013...
- Page 4 Note that in the default configuration, A Ethernet connections on each Storwize V7000 Unified file module are bonded so each pair of cables and must be plugged into the same Ethernet switch. IBM Storwize V7000 Unified: Model 2073-720 Quick Start Guide...
- Page 5 Connecting the cables from the control enclosure to the expansion units (total time 20 minutes) If you have expansion enclosures then connect them as Cabling diagram connecting the control enclosure to one shown. or more expansion units. CAUTIO N CAUT I O N Disconnect all Disconnect all supply power for...
- Page 6 Change the default admin password for the management node. Issue command chuser admin -p new_password where new_password is the new password that you want to use. The password must be a minimum of 8 characters. IBM Storwize V7000 Unified: Model 2073-720 Quick Start Guide...
- Page 7 Create a new share with the command mkexport be a minimum of 100 GB. Example: mkfs nasfs1 Example: mkexport nasfs1 /ibm/nasfs1 –nfs –owner root –createdisks 100GB,mdiskgrp0,N=10 This creates a 1 This creates a NFS export of the file system nasfs1 which TB file system named nasfs1 utilizing 10x 100 GB is owned by the user root.
- Page 8 IBM Storwize V7000 Unified: Model 2073-720 Quick Start Guide...
- Page 10 Part Number: 00AR299 Printed in USA GI13-2867-00...