Frus That Are Exchanged Within San Volume Controller 2145-8A4 Service Procedures - IBM SAN Volume Controller Hardware Maintenance Manual

Table 6. FRUs that are exchanged within SAN Volume Controller 2145-8A4 service procedures (continued)
Assembly index
-4
-
-5
-6
-7
-8
-10
-12
-13
-
-15
-
Part number
31P0937
23R2770
43W5103
39M4347
39Y7289
39M4322
41Y8247
31P1157
42C1513
39M6266
44X0204
33F8354
Units Description
1 4-port fibre-channel host
bus adapter
4 Fibre-channel SFP
transceiver
1 System board (You need 1
alcohol wipe and 1 thermal
grease syringe when you
replace this FRU. If you do
not already have these,
order them before you
begin to replace the part.)
1 Disk cable assembly (A
SATA disk drive back plate
with 2 SATA cables)
1 Power supply, 351 watt
5 Fan (40 mm)
1 Hard disk drive, 3.5 in,
simple-swap SATA
This disk drive, when
ordered as a replacement,
will be a supported
compatible drive of at least
the same capacity as the
one being replaced.
1 Service controller, including
the front-panel display and
the display and control
buttons
1 Operator-information panel
1 Operator-information panel
cable
1 Microprocessor, 3.0 GHz 6
MB dual core (You need 1
alcohol wipe and 1 thermal
grease syringe when you
replace this FRU. If you do
not already have these,
order them before you
begin to replace the part.)
1 Battery, 3.0V
Chapter 1. Parts listing
7